Thermoreflex® – Heat Transfer Vinyl
Write it, wipe it, and repeat!
A highly reflective product, manufactured through glass micro balls technology. It is EN ISO 20471 standard compliant. It features a special washing fastness even at high temperatures (up to 90°). Plotter cut. Recommended for applications onto work wear and onto applications that require more than 100-lumen luminescence.
Blackboard Applies To
Siser Cutter Settings
Blade: 45°/60° Force: 15-20 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters. Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Home Iron Instructions
- Set iron dial between Cotton and Linen
- Cover Heat Transfer Cover Sheet or Multipurpose Paper
- Place on a flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of the design for 10-15 seconds
- Peel carrier warm
- If areas of design lift after application, replace the cover sheet and re-press for 10 seconds
Heat Press Instructions
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper.
- Preheat the garment for 2-3 seconds
- Apply design at 275°F/135°C (EasyPress® users add approx. 30°)
- Use medium pressure for 15 seconds
- Peel carrier warm (at least 15 seconds off the press)
Click here for a printable version of all HTV application instructions