StripFlock® Pro – Heat Transfer Vinyl
The only flock in the industry that can be layered on itself!
A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The fuzzy opaque colors make StripFlock Pro excellent for retro designs like you’d find in a mall in the 80’s, or anytime you want a deep, rich look. StripFlock Pro is thick enough to cover hat seams, yet also looks excellent on bags, denim, and other garments that need textured visual interest. Use Stripflock Pro as a base layer and cover with other materials such as EasyWeed Stretch for an embossed look, or layer with more StripFlock! The ability to layer this material with itself and others allows you to say “yes” to multi-color designs.
StripFlock Pro is 410 Microns / 16.1 mils and is a PVC composition.
Stripflock Pro Applies To
Siser Cutter Settings
Blade: 45° Force: 20-25 Offset: .250 Speed: 10
Blade: 60° Force: 15-20 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Home Iron Instructions
- Set iron dial between Cotton and Linen
- Cover Heat Transfer Cover Sheet or Multipurpose Paper
- Place on a flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of the design for 10-15 seconds
- Peel carrier warm
- If areas of design lift after application, replace the cover sheet and re-press for 10 seconds
Heat Press Instructions
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper.
- Preheat the garment for 2-3 seconds
- Apply design at 275°F/135°C (EasyPress® users add approx. 30°)
- Use medium pressure for 15 seconds
- Peel carrier warm (at least 15 seconds off press)
Click here for a printable version of all HTV application instructions.