Sparkle® – Heat Transfer Vinyl
Make Your Designs Shimmer and Sparkle!
Sparkle™ Heat Transfer Vinyl is a fashionable alternative to Glitter HTV by Siser®. Specially constructed to be soft to the touch, each color includes silver glitter specks embedded in the material so designs have a smooth finish. Sparkle is available in 14 colors, including silver and gold. Looking to layer? Sparkle can be layered for ultimate bling! Think outside the box and use sparkle HTV on shoes, belts, and other hard-to-print items. If you like to keep it simple, can be applied to t-shirts, hoodies, sweats, and scrubs too!
EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.
Sparkle Applies To
Siser Cutter Settings
Blade: 45°/60° Force: 15-20 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters. Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Home Iron Instructions
- Set iron dial between Cotton and Linen
- Cover Heat Transfer Cover Sheet or Multipurpose Paper
- Place on a flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of the design for 10-15 seconds
- Peel carrier warm
- If areas of design lift after application, replace the cover sheet and re-press for 10 seconds
Heat Press Instructions
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper.
- Preheat the garment for 2-3 seconds
- Apply design at 275°F/135°C (EasyPress® users add approx. 30°)
- Use medium pressure for 15 seconds
- Peel carrier warm (at least 15 seconds off press)
Click here for a printable version of all HTV application instructions