P.S Film – Heat Transfer Vinyl
The most trusted heat transfer vinyl brand in the world!
Why is P.S. Film our number-one selling heat transfer vinyl? Simple, the P.S. Film Advantage! P.S. Film applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash and uses a lower pressure setting for application. P.S. Film is thinner than others on the market and offers a one-second tack application that’s great for layering. P.S. Film has a pressure-sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. P.S. Film can be cut with laser systems.
EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.
P.S Film Applies To
Siser Cutter Settings
Blade: 45°/60° Force: 5-10 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters. Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Home Iron Instructions
- Set iron dial between Cotton and Linen
- Cover Heat Transfer Cover Sheet or Multipurpose Paper
- Place on a flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of the design for 10-15 seconds
- Peel carrier warm and cold
- If areas of design lift after application, replace the cover sheet and re-press for 10 seconds
Heat Press Instructions
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper.
- Preheat the garment for 2-3 seconds
- Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
- Use medium pressure for 15 seconds
- Peel carrier warm (at least 15 seconds off press)
Click here for a printable version of all HTV application instructions