EasyWeed® Electric – Heat Transfer Vinyl®
Electrify Your Look With Unique Finishes
If you’re looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you! You’ve never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you’re looking to provide multi-color designs, EasyWeed Electric can be layered.
EasyWeed Electric is 90 Microns / 3.5 Mils and is a PU composition.
P.S. Electric Applies To
Siser Cutter Settings
Blade: 45°/60° Force: 5-10 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Home Iron Instructions
- Set iron dial between Cotton and Linen
- Cover Heat Transfer Cover Sheet or Multipurpose Paper
- Place on a flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of the design for 10-15 seconds
- Peel carrier warm
- If areas of design lift after application, replace the cover sheet and re-press for 10 seconds
Heat Press Instructions
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper.
- Preheat the garment for 2-3 seconds
- Apply design at 275°F/135°C (EasyPress® users add approx. 30°)
- Use medium pressure for 15 seconds
- Peel carrier warm (at least 15 seconds off press)
Click here for a printable version of all HTV application instructions.