Holographic – Heat Transfer Vinyl
A new dimension in heat transfer vinyl!
Holographic contains color changing chips that create the effect of depth and dimension. Available in several special effect colors and finishes, Holographic will take your designs to a new level. Love the look of rhinestones but don’t want to go through all the hassle? Holographic can be cut to look exactly like rhinestones, without having to go through all the extra work associated with applying rhinestone designs. The Holographic line also features a translucent color: Rainbow Pearl. Rainbow Pearl is unlike any other material, giving your designs an opalescent finish that changes depending on the color of the garment. Check out this blog post on working with Holographic.
Holographic is 110 Microns / 4.3 Mils and is a Polyester composition.
Holographic Applies To
Siser Cutter Settings
Blade: 45° Force: 25-32 Offset: .250 Speed: 10
Blade: 60° Force: 30-35 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Home Iron Instructions
- Set iron dial between Cotton and Linen
- Cover Heat Transfer Cover Sheet or Multipurpose Paper
- Place on a flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of the design for 10-15 seconds
- Peel carrier warm
- If areas of design lift after application, replace the cover sheet and re-press for 10 seconds
Heat Press Instructions
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper.
- Preheat the garment for 2-3 seconds
- Apply design at 275°F/135°C (EasyPress® users add approx. 30°)
- Use medium pressure for 15 seconds
- Peel carrier warm (at least 15 seconds off press)
Click here for a printable version of all HTV application instructions.
