EasyWeed® EcoStretch™ – Heat Transfer Vinyl
The lightweight, water-based HTV that stretches the boundaries of what’s possible
EasyWeed EcoStretch heat transfer vinyl by Siser® is lightweight, water-based, and applies at a low temperature so it’s perfect for performance fabrics, spandex blends, and any other project that needs a little extra bounce back. Works with all craft cutters and can be applied with either a home iron or a heat press.
EasyWeed is 90 Microns / 3.5 Mils and is a water-based polyurethane composition.
EcoStretch™ Applies To
Siser Cutter Settings
Blade: 45°/60° Force: 5-10 Offset: .250 Speed: 10
Click here to download a .pdf of settings for other cutters.
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Application Instructions
Home Iron Instructions
- Set iron dial between Cotton and Linen
- Cover Heat Transfer Cover Sheet or Multipurpose Paper
- Place on a flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of the design for 10-15 seconds
- Peel carrier warm
- If areas of design lift after application, replace the cover sheet and re-press for 10 seconds
Heat Press Instructions
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper.
- Preheat the garment for 2-3 seconds
- Apply design at 275°F/135°C (EasyPress® users add approx. 30°)
- Use medium pressure for 15 seconds
- Peel carrier warm (at least 15 seconds off press)
Click here for a printable version of all HTV application instructions.